Skip to content
 |  Tyco Electronics Segment Indicator  |   | 
Tyco Electronics - Our commitment. Your advantage.
Visit www.tycoelectronics.com Corcom Products
Home > Series > Power Line > VW

V & W Series

High Performance RFI Power Line Filters for Switching Power Supplies

UL Recognized
CSA Certified
VDE Approved

20VV1, 20VW1, 20VV6, 20VW6, 20VW7; UL CSA - 20A, VDE - 16A

Catalog Data Sheet

V and W Series

The V series and W series filters will better protect equipment from malfunctions due to conducted interference coming into the equipment from the line, especially line-to-line noise and transients. They will also provide needed noise suppression to allow most equipment to meet FCC specifications for conducted emissions.

V Series – offers an N = 3 (“T”) line-to-ground impedance to common mode and an N = 5 (“Dbl. Pi”) impedance for line-to-line differential mode interference. The filters are designed for susceptibility use when equipment impedance at RF frequencies is low.

W Series – provides an N = 4 (“Dbl. L”) line-to-ground impedance for common mode and an N = 5 (“Dbl. Pi”) impedance for line-to-line differential mode interference. The filters are designed for use when equipment impedance at RF frequencies is high. The two-stage construction provides excellent suppression at high frequency.

V series and W series filters are also effective to control emissions in equipment using SCR and T2L circuits, for compliance with FCC Part 15, Subpart J, and EN55022, Level A, down to 150kHz.

Electrical Schematic

V Series

W Series, 3A, 6A, 10A

W Series, 20A

Resistor location for reference only

Specifications

Maximum leakage current, each line to ground:
  @ 120 VAC 60 Hz 0.5 mA
  @ 250 VAC 50 Hz
.82 mA
     
Hipot rating (one minute):
  line to ground 2250 VDC
  line to line 1450 VDC
     
Operating Frequency: 50 / 60 Hz
     
Rated voltage (max.): 250 VAC
     
Rated Current: 3A to 20A *
  * refer to part number for rating
20VW7 VDE approved to 16 Amps
Minimum insertion loss in dB:
Line to ground in 50 ohm circuit

Current Rating Frequency - MHz
.15 .5 1 2 5 10 20 30  

V Series
3A 15 27 38 47 55 55 50 48  
6A 15 27 28 47 55 55 50 48  
10A 15 27 38 47 55 55 50 48  
20A 15 30 41 49 60 46 36 30  
W Series
3A 13 25 20 45 65 65 65 63  
6A 18 30 34 40 65 65 57 47  
10A 18 30 34 40 65 65 57 47  
20A 18 30 34 40 65 65 57 47  

Line to line in 50 ohm circuit

Current Rating Frequency - MHz
.15 .3 .5 1 2 5 10 20 30

V Series
3A 25 25 65 65 63 60 52 50 50
6A 40 54 65 65 65 65 60 57 55
10A 25 25 65 65 63 60 52 50 50
20A 25 25 65 65 63 60 52 50 50
W Series
3A 25 40 65 65 65 62 55 35 35
6A 30 54 65 65 65 60 55 38 38
10A 25 25 65 65 65 65 50 45 45
20A 25 25 65 65 65 65 50 45 45

 

Case Styles

3A, 6A, 10A


Download .STP files *  
3VV1, 3VW1 6VV1, 6VW1,
10VV1, 10VW1

Typical Dimensions
Terminals (5) .250 Holes (4) .07 Dia.
6.35 1.8
Slot .07 x .16 Mounting Holes (2) .188 Dia
1.8 x 4.1 4.78

20VV1 / 20VW1


Download .STP files *
20VV1, 20VW1

Typical Dimensions
Terminals (5) .250 Holes (4) .07 Dia.
6.35 1.8
Slot .07 x .16 Mounting Holes (4) .250 x .156 Dia
1.8 x 4.1 6.35 x3.96

20VV6 / 20VW6

STP Files *
20VV6 & 20VW6

* .STP files can be imported as 3D models into most CAD systems.
Files are compressed in .zip format for easy download

 

Typical Dimensions
Terminals (5) No. 8-32 Torque: 18 ± 2 in. lb.
    Mounting Holes (4) .250 x .156 Dia
  6.35 x 3.96

20VW7

Panel Cutout

Case Dimensions

Part No. A B C D E
(max.) (max.) (max.) ± .015 (max.)
± .38
3VV1, 3VW1 3.36 1.82 1.28 2.375 2.78
85.3 46.2 32.5 60.33 70.6

6VV1, 6VW1,
10VV1, 10VW1
3.86 2.08 1.53 2.938 3.34
98.0 52.8 38.9 74.63 84.8

20VV1, 20VW1 5.23 3.38 1.53 3.75 4.20
132.8 85.9 38.9 95.25 106.7

20VV6, 20VW6 5.34 3.38 1.53 3.76 4.20
135.64 85.9 38.9 95.5 106.7

20VW7 5.65 3.12 2.29    
143.51 79.25 58.17    

Part Numbers

Click on any part number for distributor stock status and eCommerce Links. For more information refer to the Corcom Part Numbering System reference.

3VV1 3VW1
6VV1 6VW1
10VV1 10VW1
20VV1 20VW1
20VV6 20VW6
20VW7  

USA Customer Service: 1-800-468-2023
Corcom Products Direct: 1-847-680-7400
Germany: 49-89-6089-0
Dimensions are in inches and millimeters unless otherwise specified. Values in italics are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change.