T Series
The T series RFI filters provide superior common-mode and premium differential-mode attenuation, exceeded only by that of Q series filters. This remarkable performance is available for current ratings up to 20 amps in package sizes smaller than comparable EP series filters. In fact, the 10-amp T is smaller than the 6-amp EP.
These filters are a size and cost-effective choice for very noisy equipment that must meet the emission limits of FCC Parts 15 and 18 or EN55022, A-level. In some cases, these filters can even bring equipment into compliance with EN55022, B-level. This performance is accomplished with circuits that still meet the very low leakage current requirements of VDE portable equipment, and (120 Volt) UL544 non-patient medical equipment
Electrical Schematic
3 & 6 Amp Models

10 Amp Models

15 & 20 AMP Models

Resistor location for reference only |
Specifications
| Maximum leakage current, each line to ground: |
| |
|
ET Models |
VT Models |
| |
@ 120 VAC 60 Hz
(3A, 6A, 10A) |
.30 mA |
.75 mA |
| |
@ 120 VAC 60 Hz
(15A, 20A) |
.30 mA |
1.2 mA |
| |
|
|
|
| |
@ 250 VAC 50 Hz
(3A, 6A, 10A) |
.50 mA |
1.25 mA |
| |
@ 250 VAC 50 Hz
(15A, 20A) |
.50 mA |
2.0 mA |
| |
|
|
| Hipot rating (one minute): |
| |
line to ground |
2250 VDC |
| |
line to line |
1450 VDC |
| |
|
|
| Operating Frequency: |
50 / 60 Hz |
| |
|
|
| Rated voltage (max.): |
250 VAC |
| |
|
|
| Rated Current: |
3A to 20A * |
| |
* refer to part number for rating |
| Minimum insertion loss in dB: |
| Line to ground in 50 ohm circuit |
|
| Current Rating |
Frequency - MHz |
| .01 |
.03 |
.05 |
.15 |
.5 |
1 |
2 |
5 |
10 |
20 |
30 |
|
| ET Models |
| 3A |
22 |
32 |
36 |
46 |
47 |
44 |
43 |
40 |
42 |
42 |
42 |
| 6A |
16 |
26 |
30 |
41 |
47 |
44 |
43 |
43 |
40 |
42 |
42 |
| 10A |
12 |
22 |
26 |
36 |
47 |
42 |
42 |
40 |
42 |
42 |
45 |
| 15A |
8 |
17 |
22 |
31 |
43 |
44 |
44 |
42 |
47 |
52 |
43 |
| 20A |
3 |
12 |
17 |
26 |
34 |
36 |
37 |
37 |
42 |
47 |
38 |
| VT Models |
| 10A |
12 |
22 |
26 |
38 |
52 |
50 |
50 |
50 |
50 |
50 |
50 |
| 15A |
8 |
17 |
22 |
33 |
52 |
52 |
52 |
52 |
57 |
45 |
35 |
| 20A |
3 |
12 |
17 |
29 |
42 |
47 |
50 |
51 |
55 |
40 |
30 |
|
| Line to line in 50 ohm circuit |
|
| Current Rating |
Frequency - MHz |
| .01 |
.03 |
.05 |
.15 |
.5 |
1 |
2 |
5 |
10 |
20 |
30 |
|
| ET Models |
| 3A |
3 |
1 |
30 |
61 |
70 |
70 |
70 |
50 |
50 |
50 |
55 |
| 6A |
4 |
2 |
14 |
51 |
70 |
70 |
70 |
65 |
47 |
50 |
55 |
| 10A |
7 |
12 |
17 |
52 |
70 |
70 |
70 |
65 |
55 |
50 |
60 |
| 15A |
12 |
19 |
15 |
51 |
70 |
70 |
70 |
70 |
70 |
65 |
60 |
| 20A |
10 |
17 |
13 |
51 |
70 |
70 |
70 |
70 |
67 |
65 |
60 |
| VT Models |
| 10A |
7 |
12 |
17 |
52 |
70 |
70 |
70 |
65 |
65 |
50 |
65 |
| 15A |
12 |
19 |
15 |
51 |
70 |
70 |
70 |
70 |
70 |
65 |
60 |
| 20A |
10 |
17 |
13 |
51 |
70 |
70 |
70 |
70 |
67 |
65 |
60 |
|
| |
|
Case Styles
3 - 10 Amp T1

| Typical Dimensions |
| Terminals (5) |
.250 |
Holes (4) |
.07 Dia. |
| 6.35 |
1.8 |
| Slot |
.07 x .16 |
Mounting Holes (2) |
.188 Dia |
| 1.8 x 4.1 |
4.78 |
15 & 20 Amp T1

| Typical Dimensions |
| Terminals (5) |
.250 |
Holes (4) |
.07 Dia. |
| 6.35 |
1.8 |
| Slot |
.07 x .16 |
Mounting Holes (4) |
.203 x .156 Dia |
| 1.8 x 4.1 |
5.16 x 3.96 |
T3

| Typical Dimensions |
| Wire Leads (min.) : |
4.0 |
Wire Gauge: |
18AWG |
| 101.6 |
Mounting Holes (2)
|
.188 Dia |
|
|
| 4.78 |
T6

| Typical Dimensions |
| Terminals (5): |
No. 8-32 |
Torque: |
18 ± 2 in. lb. |
| Mounting Holes (2) |
.250 x .156 Dia. |
|
|
| 6.35 x 3.96 |
|
T7

| Typical Dimensions |
| Terminals (3) |
.250 |
Holes (2) |
.07 Dia. |
| 6.35 |
1.8 |
| Slot |
.07 x .16 |
Inserts |
No. 6-32 x 1/4 |
| 1.8 x 4.1 |
|
Case Dimensions
| Part No. |
A |
B |
C |
D |
E |
| (max.) |
(max.) |
(max.) |
± .015 |
(max.) |
| ± .38 |
| 3ET1, 6ET1 |
3.56 |
2.15 |
1.81 |
2.938 |
3.38 |
| 90.4 |
54.6 |
46.0 |
74.63 |
85.9 |
|
| 3ET3, 6ET3 |
2.55 |
2.15 |
1.81 |
2.938 |
3.38 |
| 64.8 |
54.6 |
46.0 |
74.63 |
85.9 |
|
| 3ET7, 6ET7 |
3.52 |
2.25 |
1.78 |
1.575 |
0.63 † |
| 89.4 |
57.2 |
45.2 |
40.01 |
16.0 |
|
| 10ET1, 10VT1 |
4.69 |
2.27 |
1.80 |
4.063 |
4.47 |
| 119.1 |
57.7 |
45.7 |
103.2 |
113.5 |
|
| 10ET3, 10VT3 |
3.69 |
2.27 |
1.80 |
4.063 |
4.47 |
| 93.7 |
57.7 |
45.7 |
103.2 |
113.5 |
|
15ET1, 15VT1,
20ET1, 20VT1 |
5.45 |
3.12 |
2.18 |
3.50 |
3.96 |
| 138.4 |
79.2 |
55.4 |
88.9 |
100.6 |
|
15ET6, 15VT6,
20ET6, 20VT6 |
5.95 |
3.12 |
2.18 |
3.50 |
3.96 |
| 151.1 |
79.2 |
55.4 |
88.9 |
100.6 |
|
| † ± .02 [.5] |
Ordering and Design Information
Click on any part number for 3D CAD models, customer drawings, distributor stock status and eCommerce Links. For more information refer to the Corcom Part Numbering System reference.
|