| |

Tyco Electronics - Our commitment. Your advantage.

Visit www.tycoelectronics.com Corcom Products

Home > Series > Power Line > S

S Series

Multipurpose Power Line RFI Filter for Emission Control and High-Noise Industrial Environments

UL Recognized
CSA Certified
VDE Approved

Catalog Data Sheet

S Series

The S series filters combine Tyco Electronics successful line-to-ground interference rejection filters with additional circuitry designed to reduce line-to-line noise and transients.

These filters feature an N = 2 ( “L” ) line-to-ground impedance to common mode noise and an N = 3 ( “Pi” ) differential mode impedance line-to-line. This series is designed for use when equipment impedance at RF frequencies is high.

These filters will better protect equipment from malfunctions due to conducted interference coming into the equipment from the line, especially line-to-line noise and transients. They will also provide needed noise suppression to allow most equipment (including switchmode power supplies) to meet FCC specifications for conducted emissions.

The S series is also effective to control emissions in equipment using SCR and T2L circuits, for compliance with FCC Part 15, Subpart J, and EN55022, Level A, down to 150kHz.

Electrical Schematic

3A, 6A & 10A

20A

60A

Resistor location for reference only

Specifications

Maximum leakage current, each line to ground:
		3 to 20 Amp	60 Amp
	@ 120 VAC 60 Hz	.4 mA	.75 mA
	@ 250 VAC 50 Hz	.7 mA	1.25 mA

Hipot rating (one minute):
	line to ground	2250 VDC
	line to line	1450 VDC

Operating Frequency:		50 / 60 Hz

Rated voltage (max.):		250 VAC

Rated Current:		3A to 60A *
		* refer to part number for rating

Minimum insertion loss in dB:
Line to ground in 50 ohm circuit

Current Rating	Frequency - MHz
Current Rating	.15	.5	1	2	5	10	20	30

3A	15	27	35	40	32	44	47	47
6A	15	27	35	40	32	44	47	47
10A	15	27	35	40	32	44	47	47
20A	15	30	38	38	32	43	42	40
60A	7	27	34	38	45	54	44	40

Line to line in 50 ohm circuit

Current Rating	Frequency - MHz
Current Rating	.15	.3	.5	1	2	5	10	20	30

3A	35	50	65	65	65	60	50	40	45
6A	35	50	65	65	65	60	45	48	48
10A	35	50	65	65	65	60	50	40	45
20A	15	30	38	38	32	43	42	40
60A	37	-	77	93	86	70	54	64	54

Case Styles

3A, 6A, 10A

Typical Dimensions
Terminals (5)	.250	Holes (4)	.07 Dia.
	6.35		1.8
Slot	.07 x .16	Mounting Holes (2)	.188 Dia
	1.8 x 4.1		4.78

20VS1

Typical Dimensions
Terminals (5)	.250	Holes (4)	.07 Dia.
	6.35		1.8
Slot	.07 x .16	Mounting Holes (4)	.25 X .156 Dia.
	1.8 x 4.1		6.35 x 3.96

20VS6

Typical Dimensions
Terminals (5)	No. 8-32	Torque:	18 ± 2 in. lb
		Mounting Holes (4)	.25 X .156 Dia.
		Mounting Holes (4)	6.35 x 3.96

60VS6

Typical Dimensions
Terminals (5)	No. 1/4-20	Torque:	16 ± 2 in. lb
		Mounting Holes (4)	.218 Dia.
		Mounting Holes (4)	5.54

STP Files *

60VS6

* .STP files can be imported as 3D models into most CAD systems.
Files are compressed in .zip format for easy download

Case Dimensions

Part No.	A	B	C	D	E
	(max.)	(max.)	(max.)	± .015	(max.)
	(max.)	(max.)	(max.)	± .38	(max.)
3VS1	3.36	1.82	1.16	2.375	2.78
3VS1	85.3	46.2	29.5	60.33	70.6

6VS1	3.86	2.08	1.53	2.938	3.34
6VS1	98.0	52.8	38.9	74.63	84.8

10VS1	3.86	2.08	1.53	2.938	3.34
10VS1	98.0	52.8	38.9	74.63	84.8

20VS1	5.23	3.38	1.53	3.75	4.20
20VS1	132.8	85.9	38.9	95.25	106.7

20VS6	5.34	3.38	1.53	3.75	4.20
20VS6	132.8	85.9	38.9	95.25	106.7

60VS6	7.2	3.08	2.28	5.63	6.28
60VS6	182.88	78.23	57.91	142.87	158.78

Part Numbers

Click on any part number for distributor stock status and eCommerce Links. For more information refer to the Corcom Part Numbering System reference.

3VS1	10VS1
6VS1	20VS1
20VS6	60VS6

USA Customer Service:	1-800-468-2023
Corcom Products Direct:	1-847-680-7400
Germany:	49-89-6089-0

Dimensions are in inches and millimeters unless otherwise specified. Values in italics are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change.