Skip to content
 |  Tyco Electronics Segment Indicator  |   | 
Tyco Electronics - Our commitment. Your advantage.
Visit www.tycoelectronics.com Corcom Products
Home > Series > Power Line > G

G Series

High Performance RFI Filters for Switching Power Supplies

UL Recognized
CSA Certified
VDE Approved

Catalog Data Sheet

G Series

The G series RFI filters are designed to provide excellent common-mode and differential-mode attenuation for most digital electronic equipment (particularly switching power supplies) over the frequency range of 20kHz to 30MHz.

These filters are a size- and cost-effective solution for equipment that must meet the conducted emission limits of EN55022 Level A requirements, as well as FCC Part 15J, Class B.

The EG models also meet the very low leakage current requirements for VDE portable equipment as well as (120 volt) UL 544 non-patient medical equipment.

Electrical Schematic

6EG & 6VG Models

10EG & 10VG Models

Resistor location for reference only

Specifications

Maximum leakage current, each line to ground:
    EG Models VG Models
  @ 120 VAC 60 Hz .30 mA 1.2 mA
  @ 250 VAC 50 Hz .50 mA 2.0 mA
     
Hipot rating (one minute):
  line to ground 2250 VDC
  line to line 1450 VDC
     
Operating Frequency: 50 / 60 Hz
     
Rated voltage (max.): 250 VAC
     
Rated Current: 6A to 10A *
  * refer to part number for rating
Minimum insertion loss in dB:
Line to ground in 50 ohm circuit
Current Rating Frequency - MHz
.01 .05 .07 .1 .15 .5 1 5 10 30
EG1
6A 6 19 23 25 29 48 44 43 40 40
10A 8 10 15 18 42 64 65 65 60 60
VG1
6A 4 18 21 25 30 56 55 53 45 45
10A 5 10 24 37 50 72 70 70 60 60
Line to line in 50 ohm circuit
Current Rating Frequency - MHz
.01 .05 .07 .1 .15 .5 1 5 10 30
EG1
6A 4 6 10 24 37 66 75 72 50 50
10A 5 5 5 26 40 65 65 60 70 70
VG1
6A 4 7 7 26 39 67 75 68 55 55
10A 5 5 7 26 39 65 60 60 70 70
 

Case Styles

EG1 & VG1

Typical Dimensions
Terminals (5) .250 Holes (4) .07 Dia.
6.35 1.8
Slot .07 x .16 Mounting Holes (2) .188 Dia
1.8 x 4.1 4.78

 

Case Dimensions

Part No. A B C D E
(max.) (max.) (max.) ± .015 (max.)
± .38
6EG1/VG1 3.56 2.15 1.56 2.938 3.38
90.4 54.6 39.6 74.63 85.8
10EG1/VG1 4.69 2.27 1.8 4.063 4.47
119.1 57.7 45.7 103.2 113.5
 

Part Numbers

Click on any part number for distributor stock status and eCommerce Links. For more information refer to the Corcom Part Numbering System reference.

6EG1 6VG1
10EG1 10VG1

USA Customer Service: 1-800-468-2023
Corcom Products Direct: 1-847-680-7400
Germany: 49-89-6089-0
Dimensions are in inches and millimeters unless otherwise specified. Values in italics are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change.