EMC Series
The EMC series of RFI filters has been developed to reduce conducted noise to acceptable limits for equipment that must comply with the requirements of CISPR in Europe and the FCC specifications in the USA.
The EMC series is the most compact dual stage filter available from Tyco Electronics. This cost effective design has a maximum current rating of 30 amps; higher than any similar catalog product. The EMC series was designed to address the need for more differential mode attenuation in the lower frequency range while still maintaining high common mode performance. This type of performance is typically needed for motor drives and switch mode power supplies with increased operating frequencies. The EMC series is ideal for applications that require a high level of performance in a compact, cost effective package.
Electrical Schematic
Resistor location for reference only |
Specifications
| Maximum leakage current, each line to ground: |
| |
|
3, 6, 10 Amp |
15, 20, 30 Amp |
| |
@ 120 VAC 60 Hz |
.21 mA |
.73 mA |
| |
@ 250 VAC 50 Hz |
.43 mA |
1.52 mA |
| |
|
|
| Hipot rating (one minute): |
| |
line to ground |
2250 VDC |
| |
line to line |
1450 VDC |
| |
|
|
| Operating Frequency: |
50 / 60 Hz |
| |
|
|
| Rated voltage (max.): |
250 VAC |
| |
|
|
| Rated Current: |
1A to 30A * |
| |
* refer to part number for rating |
| Minimum insertion loss in dB: |
| Line to ground in 50 ohm circuit |
|
| Current Rating |
Frequency - MHz |
| .05 |
.07 |
.11 |
.15 |
1 |
2 |
10 |
20 |
30 |
|
| 3A |
6 |
6 |
3 |
16 |
65 |
66 |
62 |
60 |
59 |
| 6A |
6 |
6 |
2 |
15 |
65 |
67 |
65 |
62 |
63 |
| 10A |
5 |
2 |
13 |
24 |
72 |
72 |
56 |
50 |
48 |
| 15A |
3 |
1 |
12 |
22 |
70 |
68 |
57 |
54 |
53 |
| 20A |
2 |
2 |
11 |
21 |
58 |
57 |
63 |
55 |
52 |
| 30A |
2 |
2 |
14 |
22 |
47 |
52 |
60 |
48 |
43 |
|
| Line to line in 50 ohm circuit |
|
| Current Rating |
Frequency - MHz |
| .05 |
.07 |
.11 |
.15 |
1 |
2 |
10 |
20 |
30 |
|
| 3A |
12 |
13 |
7 |
18 |
64 |
69 |
65 |
60 |
52 |
| 6A |
12 |
12 |
8 |
27 |
61 |
61 |
59 |
56 |
54 |
| 10A |
14 |
15 |
12 |
33 |
54 |
58 |
47 |
34 |
36 |
| 15A |
16 |
16 |
13 |
34 |
61 |
52 |
36 |
36 |
23 |
| 20A |
17 |
19 |
15 |
37 |
67 |
62 |
36 |
32 |
30 |
| 30A |
17 |
18 |
14 |
40 |
62 |
53 |
30 |
28 |
26 |
|
| |
|
Case Styles
EMC1
| Typical Dimensions |
| Terminals (5) |
.250 |
Mounting Holes (2) |
.187 Dia ±.008 |
| 6.35 |
4.75 ±.20 |
EMC3
| Typical Dimensions |
| Wire Leads (min.) |
4.0 |
Mounting Holes (2) |
.187 Dia ±.008 |
| 101.6 |
4.75 ±.20 |
EMC6
| Typical Dimensions |
| Terminals (5): |
8-32 |
Mounting Holes (2) |
.187 Dia ±.008 |
| 4.75 ±.20 |
30EMC6
| Typical Dimensions |
| Terminals (5): |
10-32 |
Mounting Slots (4): |
.203 x.156 |
|
5.16 x 3.96 |
|
20VDK6
Case Dimensions
| Part No. |
A |
B |
C |
D |
E |
| (max.) |
(max.) |
(max.) |
(max.) |
(max.) |
| 3EMC1 |
3.35 |
1.81 |
1.16 |
2.375 |
2.78 |
| 85.1 |
46.0 |
29.5 |
60.3 |
70.6 |
|
| 6EMC1, 10EMC1 |
3.85 |
2.07 |
1.16 |
2.938 |
3.35 |
| 97.8 |
52.6 |
29.5 |
74.6 |
85.1 |
|
| 15EMC1, 20EMC1 |
4.97 |
2.25 |
1.78 |
4.063 |
4.46 |
| 126.2 |
57.2 |
45.2 |
103.2 |
113.3 |
|
| 3EMC3 |
2.07 |
1.81 |
1.16 |
2.375 |
2.78 |
| 52.6 |
46.0 |
29.5 |
60.3 |
70.6 |
|
| 6EMC3 |
2.56 |
2.07 |
1.16 |
2.938 |
3.35 |
| 65.0 |
52.6 |
29.5 |
74.6 |
85.1 |
|
| 10EMC3 |
2.56 |
2.07 |
1.53 |
2.938 |
3.35 |
| 65.0 |
52.6 |
38.9 |
74.63 |
85.1 |
|
| 15EMC3 |
3.69 |
2.25 |
1.78 |
4.063 |
4.47 |
| 93.7 |
57.2 |
45.2 |
103.2 |
113.5 |
|
| 10EMC6 |
3.94 |
2.07 |
1.53 |
2.938 |
3.35 |
| 99.9 |
52.6 |
38.9 |
74.6 |
85.1 |
|
| 15EMC6, 20EMC6 |
5.09 |
2.25 |
1.78 |
4.063 |
4.47 |
| 129.3 |
57.2 |
45.2 |
103.2 |
113.5 |
|
| 30EMC6 |
6.05 |
3.12 |
2.18 |
3.50 |
3.96 |
| 153.7 |
79.2 |
55.4 |
88.9 |
100.6 |
|
| |
Ordering and Design Information
Click on any part number for 3D CAD models, customer drawings, distributor stock status and eCommerce Links. For more information refer to the Corcom Part Numbering System reference.
|
