| |

Tyco Electronics - Our commitment. Your advantage.

Visit www.tycoelectronics.com Corcom Products

Home > Series > PEM > GGHG

GG / HG Series

Smallest Filtered Power Entry Modules with Metric Fuseholders

UL Recognized
CSA Certified
VDE Approved

Catalog Data Sheet

GG / HG Series

GG Series

The GG series power entry modules combine the functions of a general purpose RFI filter with an IEC power cord connector and single or dual metric fusing, in the smallest possible panel space. A choice of .250” terminals or wire leads is available for the load-side terminations.

For maximum cost effectiveness, 6 amp models should be used for all applications rated 6 amps or less, unless the higher performance of the 3 amp models, or the much higher performance of the 1 amp models, is needed.

Models with C-suffix additionally incorporate a ground choke1 to isolate the equipment chassis from external ground at RF frequencies.

HG Series

A medical version of our GG series, these filters offer the same compact design but reduce the line-to-ground capacitance in order to meet UL 2601 patient care requirements.

See Appendix C for more information on UL544 or UL2601 health care applications.

Note: When using the models with an IEC connector, remember that the leakage current of the companion line cord, GA400, is more significant than that of the filter - which may disqualify this line cord from use in patient care applications.

Electrical Schematic

GG / GS / HG

GG-C

Note 1: Depicts single fues for -1 models
Note 2: For HG delete line-to-ground capacitors

CAUTION: DO NOT ATTEMPT TO OPERATE A SINGLE-FUSED MODEL WITHOUT THE FUSE DOOR IN PLACE

Resistor location for reference only

Specifications

Maximum leakage current, each line to ground:
		HG Models	GG Models
	@ 120 VAC 60 Hz	2 µA	.25 mA
	@ 250 VAC 50 Hz	5 µA	.42 mA

Hipot rating (one minute):
	line to ground	1550 VAC
	line to line	1450 VDC

Operating Frequency:		50 / 60 Hz

Rated voltage (max.):		250 VAC

Rated Current:		1 to 6 Amps
		* refer to part number for rating

Fuse (not included):		5 x 20 mm -1 models require 1 fuse -2 models require 2 fuses

Minimum insertion loss in dB:
Line to ground in 50 ohm circuit

Current Rating	Frequency - MHz
Current Rating	.01	.05	.10	.15	.5	1	5	10	30

GG/GS Models
1A	12	23	29	32	41	47	50	50	55
3A	-	10	15	19	30	36	48	50	53
6A	-	1	4	10	16	22	36	40	50
HG Models
1A	12	23	29	32	40	40	28	22	18
3A	-	10	15	19	25	26	22	21	21
6A	-	4	10	14	18	18	14	14	14

Line to line in 50 ohm circuit

Current Rating	Frequency - MHz
Current Rating	.10	.15	.5	1	3	5	10	30

GG/GS Models
1A	1	3	14	23	41	47	50	44
3A	1	2	11	14	25	38	44	40
6A	1	2	10	13	23	33	39	42
HG Models
1A	2	6	19	26	30	35	35	20
3A	1	7	16	23	30	30	30	30
6A	4	7	16	23	30	30	30	30

Case Styles

GG1 / HG1

Typical Dimensions
Terminals (3)	.250	Holes (2)	.07 Dia.
	6.35		1.8
Slot	.07 x .16	Mounting Holes (2)	.126 Dia
	1.8 x 4.1		3.20

Download .STP file *

GG8

Typical Dimensions
Wire Leads (min.) :	5.0	Wire Gauge:	18AWG
	127.0
Mounting Holes (2)	.126Dia
	3.20

EGS

* .STP files can be imported as 3D models into most CAD systems.
Files are compressed in .zip format for easy download

Recommended Panel Cutouts

For panel thickness .032 - .080 [.81-2.03]
radius: 0.138 [0.35]

Case Dimensions

Part No.	A	B	C	D	E
	(max.)	(max.)	(max.)	± .015	(max.)
	(max.)	(max.)	(max.)	± .38	(max.)
EGG1-1, EGG1-2, EHG1-2	2.15	1.13	1.29	1.417	1.76
EGG1-1, EGG1-2, EHG1-2	54.5	28.7	32.8	36.0	44.7

EGG8-1, EGG8-2, EGG8C-1, EGG8C-2	2.02	1.13	1.29	1.417	1.76
EGG8-1, EGG8-2, EGG8C-1, EGG8C-2	51.1	28.7	32.8	36.0	44.7

EGG1C-1, EGG1C-2	2.45	1.13	1.29	1.417	1.76
EGG1C-1, EGG1C-2	62.23	28.7	32.8	36.0	44.7

EGS1-1, EGS1-2, EHGS1-2	2.13	1.13	1.28	1.46 *	1.42
EGS1-1, EGS1-2, EHGS1-2	54.0	28.7	32.5	36.0	36.1

* Max

Part Numbers

Click on any part number for distributor stock status and eCommerce Links. For more information refer to the Corcom Part Numbering System reference.

Part Number ¹		RFI Filter Type ²	Current Rating ³	Metric Fuseholders	Load Side Terminations

1EGG1-1		General Purpose	1	1	.250 [6.35] Terminals (3)
1EGG1-2		General Purpose	1	2	.250 [6.35] Terminals (3)
1EGG8-1		General Purpose	1	1	5.0 [127.0] Wire Leads
1EGG8-2		General Purpose	1	2	5.0 [127.0] Wire Leads
1EGS1-1		General Purpose	1	1	.250 [6.35] Terminals (3)
1EGS1-2		General Purpose	1	2	.250 [6.35] Terminals (3)

3EGG1-1		General Purpose	3	1	.250 [6.35] Terminals (3)
3EGG1-2		General Purpose	3	2	.250 [6.35] Terminals (3)
3EGG8-1		General Purpose	3	1	5.0 [127.0] Wire Leads
3EGG8-2		General Purpose	3	2	5.0 [127.0] Wire Leads
3EGS1-1		General Purpose	3	1	.250 [6.35] Terminals (3)
3EGS1-2		General Purpose	3	2	.250 [6.35] Terminals (3)

6EGG1-1		General Purpose	6	1	.250 [6.35] Terminals (3)
6EGG1-2		General Purpose	6	2	.250 [6.35] Terminals (3)
6EGG8-1		General Purpose	6	1	5.0 [127.0] Wire Leads
6EGG8-2		General Purpose	6	2	5.0 [127.0] Wire Leads
6EGS1-1		General Purpose	6	1	.250 [6.35] Terminals (3)
6EGS1-2		General Purpose	6	2	.250 [6.35] Terminals (3)

1EHG1-2		Medical	1	2	.250 [6.35] Terminals (3)
3EHG1-2		Medical	3	2	.250 [6.35] Terminals (3)
6EHG1-2		Medical	6	2	.250 [6.35] Terminals (3)
1EHGS1-2		Medical	1	2	.250 [6.35] Terminals (3)
3EHGS1-2		Medical	3	2	.250 [6.35] Terminals (3)
6EHGS1-2		Medical	6	2	.250 [6.35] Terminals (3)

1	Ground choke available for all general purpose models. Add suffix "C" (1EGG1C-1) Does not include EGS models
2	General purpose filter for susceptibility applications
3	Current rating @ 120 VAC and 250 VAC

USA Customer Service:	1-800-468-2023
Corcom Products Direct:	1-847-680-7400
Germany:	49-89-6089-0

Dimensions are in inches and millimeters unless otherwise specified. Values in italics are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change.