| |

Tyco Electronics - Our commitment. Your advantage.

Visit www.tycoelectronics.com Corcom Products

Home > Series > PEM > C

C Series

Switch with EIEC Connector Compact Size

UL Recognized
CSA Certified
VDE Approved

Catalog Data Sheet

C Series

Two function power entry module combining a DPST switch and an IEC 320 power line connector. Compact packaging allows a smaller panel cutout with choice of snap-in or flange mounting. Available with general purpose filtering (F models - CFS, CFE), medical application filtering (H models - CHS, CHE) or unfiltered (CS, CE). Terminals allow for easy connection to any wiring scheme. Preconnected terminals from line to switch are available (B Models - CBS, CBE) for reducing OEM wiring time.

The medical versions (H models) are designed specifically for health care applications. Their extremely low leakage current allows compliance with UL544 and UL2601 as well as CSA22.2 health care specifications for use with both patient and non-patient care equipment.

See Appendix C for more information on UL544 or UL2601 health care applications.

Note: When using the models with an IEC connector, remember that the leakage current of the companion line cord, GA400, is more significant than that of the filter - which may disqualify this line cord from use in patient care applications.

Electrical Schematic

F Models (CFS, CFE)

H Models (CHS, CHE)

B Models (CBS, CBE)

Resistor location for reference only

Specifications

Maximum leakage current, each line to ground †:
		F Models	H Models
	@ 120 VAC 60 Hz	.25 mA	2 µA
	@ 250 VAC 50 Hz	.40 mA	5 µA

Hipot rating (one minute):
	line to ground	2250 VDC
	line to line	1450 VDC

Operating Frequency:		50 / 60 Hz

Operating voltages:		115/230 VAC

Rated Current:		1 to 10 Amps
		* refer to part number for rating

Switch:		Double-insulated rated for 10,000 operations at full load. Amp inrush capability.

Unfilterd Push-on Force:		18 lb / 80N

Minimum insertion loss in dB:
Line to ground in 50 ohm circuit

Current Rating	Frequency - MHz
Current Rating	.05	.15	.5	1	5	10	30

F Models
1A	10	26	46	48	46	47	46
3A	8	16	32	36	43	48	50
6A	4	11	22	27	36	41	50
10A	1	4	14	18	27	33	42
H Models
1A	16	21	37	44	26	21	10
3A	9	14	31	32	26	24	14
6A	4	10	22	23	19	18	13
10A	2	6	10	15	11	11	9

Line to line in 50 ohm circuit

Current Rating	Frequency - MHz
Current Rating	.05	.15	.5	1	5	10	30

F Models
1A	1	3	13	28	62	67	42
3A	2	6	14	23	65	65	67
6A	2	6	14	27	46	48	58
10A	1	7	14	23	42	44	62
H Models
1A	1	6	13	29	38	42	26
3A	1	5	10	22	36	34	36
6A	1	5	14	20	31	33	37
10A	1	4	11	19	32	37	38


† Applies to Filtered Models only

Case Styles

CE, CBE

Download .STP file *

CS, CBS

Download .STP file *

CFE, CHE

CFS, CHS

Typical Dimensions
Terminals (3)	.250	Holes (2)	.07 Dia.
	6.35		1.8
Slot	.07 x .16	Mounting Holes (2)	.132 Dia
	1.8 x 4.1		3.35
		with .260 x 90° countersunk for#4 Flathead Screw

CBS, CBE Pre-Connected Terminals

* .STP files can be imported as 3D models into most CAD systems.
Files are compressed in .zip format for easy download

Recommended Panel Cutout

Panel Cutout for thickness of .031 - 0.98 [.8-2.5]
Not recommended for plastic panels.

Snap-in models allow front mounting only.

For snap-in applications, the D sides of the the cutout must
have a .02 [.508] radius on the instllation side.

Case Dimensions

Part No.	A	B	C	D	E	F
	(max.)	(max.)	(max.)	± .006	± .006	± .006
	(max.)	(max.)	(max.)	± .152	± .152	± .152
CS, CBS	1.23	.97	1.62	1.06	1.54
CS, CBS	31.24	24.64	41.17	26.92	39.12

CE, CBE	1.74	.97	1.62	1.06	1.54	1.417
CE, CBE	44.2	24.64	41.17	26.92	39.12	36.0

CFS, CHS	1.23	2.53	1.62	1.12	1.54
CFS, CHS	31.24	64.26	41.17	28.5	39.12

CFE, CHE	1.74	2.53	1.62	1.12	1.54	1.417
CFE, CHE	44.2	64.26	41.17	28.5	39.12	36.0

Part Numbers

Click on any part number for distributor stock status and eCommerce Links. For more information refer to the Corcom Part Numbering System reference.

USA Customer Service:	1-800-468-2023
Corcom Products Direct:	1-847-680-7400
Germany:	49-89-6089-0

Dimensions are in inches and millimeters unless otherwise specified. Values in italics are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change.