Skip to content
 |  Tyco Electronics Segment Indicator  |   | 
Tyco Electronics - Our commitment. Your advantage.
Visit www.tycoelectronics.com Corcom Products
Home > Series > PCBoard > EDPEOP

EDP, EOP Series

PC Board Mountable RFI Filters for General Purpose Applications

UL Recognized
CSA Certified
VDE Approved

Catalog Data Sheet

EDP Series

The EDP series RFI filters provide enhanced differential mode performance for applications requiring more line-toline protection. The EDP filters feature low leakage current for European safety requirements.

PC board mounted and only slightly taller than the EOP series filters, the EDP filters are available up to 10 amps.

EOP Series

The EOP series RFI power line filters are general purpose filters which are effective in removing both common and differential mode noise for susceptibility applications. These filters have low leakage current for European safety requirements.

The compact design allows PC board mounting with minimal space requirements. Available from 1 to 10 amps, the filters provide a cost effective alternative to on board components.

Electrical Schematic

EDP & EOP Models

Resistor location for reference only

Specifications

Maximum leakage current, each line to ground:
  @ 120 VAC 60 Hz .22 mA
  @ 250 VAC 50 Hz .38 mA
     
Hipot rating (one minute):
  line to ground 1500 VAC
  line to line 1450 VDC
     
Operating Frequency: 50 / 60 Hz
     
Rated voltage (max.): 250 VAC
     
Rated Current: 1A to 10A *
  * refer to part number for rating
Minimum insertion loss in dB:
Line to ground in 50 ohm circuit
Current Rating Frequency - MHz
.15 .5 1 5 10 30
EDP Models            
1A 32 41 54 54 46 40
3A 18 28 35 41 40 40
6A 10 20 28 37 40 40
10A 5 14 19 27 33 40
EOP Models            
1A 32 41 54 54 46 40
3A 18 28 35 41 40 40
6A 10 20 28 37 40 40
10A 5 14 19 27 33 40

Line to line in 50 ohm circuit
Current Rating Frequency - MHz
.15 .5 1 5 10 30
EDP Models            
1A 4 14 42 42 44 38
3A 4 14 24 38 38 38
6A 4 14 22 30 34 34
10A 6 16 22 40 50 45
Current Rating Frequency - MHz
.15 .5 1 2 4 10 20 30
EOP Models                
1A 1 6 19 39 48 52 38 35
3A 1 4 9 9 28 41 36 35
6A 1 4 9 9 40 40 42 35
10A 1 4 9 9 14 35 42 35

Case Styles

EDP & EOP

Pins .025 square

Mounting Holes Pattern and Clearance

Case Dimensions

Part No. A B C
(max.) (max.) (max.)
EDP 1.44 1.24 0.95
36.6 31.5 24.14
EOP 1.44 1.24 0.78
36.6 31.5 19.9

Part Numbers

Click on any part number for distributor stock status and eCommerce Links. For more information refer to the Corcom Part Numbering System reference.

1EDP 1EOP
3EDP 3EOP
6EDP 6EOP
10EDP 10EOP

 
USA Customer Service: 1-800-468-2023
Corcom Products Direct: 1-847-680-7400
Germany: 49-89-6089-0
Dimensions are in inches and millimeters unless otherwise specified. Values in italics are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change.