MV Series

Multi-purpose Medical Filter for Power Line Noise Protection with Limited Leakage Current

UL Recognized
CSA Certified
VDE Approved

Catalog Data Sheet

MV Series

The MV series answers the need for a medical filter to help equipment comply with increasing noise sources in medical applications while still meeting leakage current requirements of UL2601.

Less strict than previous UL medical standards, UL2601 limits leakage current for patient care equipment. Due to the increased need for higher performance filtering, UL has allowed more leakage current than in previous standards.

The MV takes advantage of this to offer improved line-toground performance in a moderately priced filter. Higher line-to-line performance is achieved through its additional differential mode rod inductors. Overall, the filter provides a good solution to emission and immunity problems, at a moderate cost, in a reasonable package size.

Electrical Schematic

Resistor location for reference only

Specifications

Maximum leakage current, each line to ground:
	@ 120 VAC 60 Hz	.07 mA
	@ 250 VAC 50 Hz	.13 mA

Hipot rating (one minute):
	line to ground	2250 VDC
	line to line	1450 VDC

Operating Frequency:		50 / 60 Hz

Rated voltage (max.):		250 VAC

Rated Current:		3A to 20A

Minimum insertion loss in dB:
Line to ground in 50 ohm circuit

Current Rating	Frequency - MHz
Current Rating	.15	.5	1	2	5	10	20	30

3A	14	19	20	30	46	40	34	31
6A	19	27	30	38	50	40	35	35
10A	15	25	26	34	46	50	44	42
20A	18	30	34	34	46	40	36	20


Line to line in 50 ohm circuit

Current Rating	Frequency - MHz
Current Rating	.15	.5	1	2	5	10	20	30

3A	33	65	65	65	65	60	53	50
6A	40	65	65	65	65	60	57	55
10A	33	65	65	65	65	65	55	55
20A	25	65	65	65	65	60	57	45

Case Styles

3/6/10 MV1

20MV1

Typical Dimensions
Terminals (5)	.250	Holes (4)	.07 Dia.
	6.35		1.8
3A, 6A, & 10A Mounting Holes (2)	.188 Dia	20A Mounting Holes (4):	.250 x .156 Dia
	4.78		6.35 x 3.96

Case Dimensions

Part No.	A	B	C	D	E
	(max.)	(max.)	(max.)	±.015	(max.)
	(max.)	(max.)	(max.)	± .38	(max.)
3MV1	3.36	1.82	1.28	2.375	2.78
3MV1	85.3	46.2	32.5	60.33	70.6

6MV1	3.86	2.08	1.53	2.938	3.34
6MV1	98.0	52.8	38.9	74.63	84.8

10MV1	3.86	2.08	1.53	2.938	3.34
10MV1	98.0	52.8	38.9	74.63	84.8

20MV1	5.23	3.38	1.53	3.75	4.20
20MV1	132.8	85.9	38.9	95.25	106.7

Part Numbers

Click on any part number for distributor stock status and eCommerce Links. For more information refer to the Corcom Part Numbering System reference.

3MV1
6MV1
10MV1
20MV1

USA Customer Service:	1-800-468-2023
Corcom Products Direct:	1-847-680-7400
Germany:	49-89-6089-0

Dimensions are in inches and millimeters unless otherwise specified. Values in italics are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change.