EEA, EEB Series

Cost Effective Compact RFI Filter IEC Connector Package

UL Recognized
CSA Certified
VDE Approved

Catalog Data Sheet

EEA Series

This is a new generation of compact RFI filters with IEC socket. A totally new design in both the internal structure and manufacturing process makes this series cost effective and compact. The EEA series supersedes the EF series by providing superior performance, particularly in the common mode at low frequencies. Mechanically, its slimmer size makes it compatible with all similar filters on the market.

EEB Series

This is a new generation of compact RFI filters with IEC socket. A totally new design in both the internal structure and manufacturing process makes this series cost effective and compact. Electrically, the EEB provides enhanced differential mode performance compared to both the EEA and EF series. Mechanically, its slimmer size makes it compatible with all similar filters on the market.

Electrical Schematic

Resistor location for reference only

Specifications

Maximum leakage current, each line to ground:
	@ 120 VAC 60 Hz	.22 mA
	@ 250 VAC 50 Hz	.38 mA

Hipot rating (one minute):
	line to ground	1500 VAC
	line to line	1450 VDC

Operating Frequency:		50 / 60 Hz

Rated voltage (max.):		250 VAC

Rated Current:		1A to 10A *
		* refer to part number for rating

Minimum insertion loss in dB:
Line to ground in 50 ohm circuit

Current Rating	Frequency - MHz
Current Rating	.01	.05	.1	.15	.5	1	5	10	30

EEA Models
1A	12	23	29	32	41	47	47	47	40
3A	-	10	15	19	30	36	48	50	47
6A	-	1	4	10	22	28	42	48	47
10A	-	1	3	5	14	20	32	38	47
EEB Models
1A	12	23	29	32	41	47	47	47	40
3A	-	10	14	18	30	36	48	50	47
6A	-	1	4	10	22	28	42	48	47
10A	-	1	3	5	14	20	32	38	47

Line to line in 50 ohm circuit

Current Rating	Frequency - MHz
Current Rating	.5	1	1.5	3	5	10	30

EEA Models
1A	1	9	19	32	42	45	40
3A	2	4	6	20	35	45	40
6A	2	4	6	6	24	40	40
10A	1	4	5	5	5	30	40

Current Rating	Frequency - MHz
Current Rating	.01	.15	.5	1	3	5	10	30

EEB Models
1A	1	3	14	23	41	47	50	44
3A	1	2	11	14	25	38	44	40
6A	1	2	10	14	20	33	42	40
10A	1	2	10	16	19	19	39	40

Case Styles

EEA1 / EEB1

Front or back mounting

EEA2 / EEB2

back mount only

Typical Dimensions
Terminals (3)	.250	Holes (2)	.07 Dia.
	6.35		1.8
Slot	.07 x .16	Mounting Holes (2)	.132 Dia
	1.8 x 4.1		3.35
		with .260 x 90° countersunk for#4 Flathead Screw

EEAP / EEBP

Back mount only

Typical Dimensions
Pins (3)	.025 square	Mounting Holes (2)	.132 Dia
	.635		3.35
		with .260 x 90° countersunk for#4 Flathead Screw

Recommended Panel Cutouts

tolerance ± .005 [0.13]

Case Dimensions

Part No.	A	B	C	D	E
	(max.)	(max.)	(max.)	±.010	(max.)
	(max.)	(max.)	(max.)	± .25	(max.)
EEA1	2.15	1.12	0.81	1.575	1.98
EEA1	54.6	28.4	20.6	40.01	50.3

EEA2	1.54	1.12	0.81	1.575	1.98
EEA2	39.1	28.4	20.6	40.01	50.3

EEAP	1.54	1.12	0.81	1.575	1..98
EEAP	39.1	28.4	20.6	40.01	50.3

EEB1	2.15	1.12	0.81	1.575	1.98
EEB1	54.6	28.4	20.6	40.01	50.3

EEB2	1.54	1.12	0.81	1.575	1.98
EEB2	39.1	28.4	20.6	40.01	50.3

EEBP	1.54	1.12	0.81	1.575	1.98
EEBP	39.1	28.4	20.6	40.01	50.3

Part Numbers

Click on any part number for distributor stock status and eCommerce Links. For more information refer to the Corcom Part Numbering System reference.

1EEA1	1EEB1
1EEA2	1EEB2
1EEAP	1EEBP
3EEA1	3EEB2
3EEA2	3EEB2
3EEAP	3EEBP
6EEA1	6EEB1
6EEA2	6EEB2
6EEAP	6EEBP
10EEA1	10EEB1
10EEA2	10EEB2
10EEAP	10EEBP

Line Cord	GA400
Insulating Boot	FA601

USA Customer Service:	1-800-468-2023
Corcom Products Direct:	1-847-680-7400
Germany:	49-89-6089-0

Dimensions are in inches and millimeters unless otherwise specified. Values in italics are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change.