Skip to content
 |  Tyco Electronics Segment Indicator  |   | 
Tyco Electronics - Our commitment. Your advantage.
Visit www.tycoelectronics.com Corcom Products
Home > Series > Facility > PFC

Power Factor Correction Coils

 

Catalog Data Sheet

Features

  • Used to cancel part of the undesirable capacitive-reactive current dure to the line-to-ground capacitors in Power Line Filters operating at 400 Hz power
  • Coils are optional for CDEUX, CDEUW and CDEUL filters

Electrical Characteristics

Voltage Rating: 120/208 VAC / 400 Hz
Temperature Rise: Case temperature rise shall not exceed 35°C when operating at an ambient temperature of 25°C.

Materials

Unit Case:

#16GA min. steel. All surfaces painted. Unit is filled with mineral oil with pressure release holes. Standard unit is designed for horizontal surface mounting. Vertical surface mounting is available upon special request.

Notes:

  1. Pressure release device is blocked by a brass cap to keep oil from leaking. After unit is installed, this cap must be replaced with a special cap (supplied) with pressure release holes.
  2. The special cap should be checked frequently to keep all holes unclogged.

Case Styles and Dimensions

Model No. All Dimensions ± 0.06 [1.52] Current
per Phase
Used for
A B C D E F

SPFC301 16.0 10.0 12.0 12.0 8.0 8.0 12A CDEUL030A4
CDEUX030A4
406.4 254.0 304.8 304.8 203.2 203.2
SPFC302 18 11 14 13 8 8 24A CDEUL060A4
CDEUX060A4
457.2 279.4 355.6 330.2 203.2 203.2
SPFC303 18.0 16.0 14.0 18.0 14.0 12.0 36A CDEUL100A4
CDEUX100A4
457.2 406.4 355.6 457.2 355.6 304.8
SPFC304 20.0 20.0 16.0 22.0 14.0 12.0 48A CDEUL225A4
CDEUX225A4
508.0 508.0 406.4 558.8 355.6 304.8

 

USA Customer Service: 1-800-468-2023
Corcom Products Direct: 1-847-680-7400
Germany: 49-89-6089-0
Dimensions are in inches and millimeters unless otherwise specified. Values in italics are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change.