| |

Tyco Electronics - Our commitment. Your advantage.

Visit www.tycoelectronics.com Corcom Products

Home > Series > DC > DA

DA Series

Compact RFI Line Filter with DC Inlet connector

UL Recognized
CSA Certified
TUV Approved

Catalog Data Sheet

DA Series

The DA Series filters were designed as general purpose line filters for DC applications up to 125VDC. They are compact with a 3-pin inlet connector. They are available in 3, 6, 10 and 15 amp versions. They are flange mount with 1/4” or PCB terminals.

The DA Series addresses the increasing need for DC rated filters with a standard DC power inlet. It was designed and first used for communication oriented customer premises equipment and central office equipment, but is not restricted to that. Any internal DC connection within larger multi-component systems, or external DC connection between user installed components which require filtering will benefit. Some examples include desktop servers, routers, switches, multiplexors, aggregators, concentrators, process control equipment as well as DC powered peripheral equipment.

The DA Series mates with a standard MOLEX connector (HCS Series) which is readily available and better prevents accidental connection to AC power.

Electrical Schematic

Resistor location for reference only

Specifications

Hipot rating (one minute):
	line to ground	2250 VDC
	line to line	1450 VDC

Rated voltage (max.):		125 VDC

Rated Current†:		3A to 15A *
		* refer to part number for rating

Operating ambient temperature range at rated current I_r		-10°C to +55°C
In an ambient, T_a, higher than +55° C, the maximum operating current, I_o, is calculated as follows: I_o=I_r√(90-T_a/35 )

Minimum insertion loss in dB:
Line to ground in 50 ohm circuit

Current Rating	Frequency - MHz
Current Rating	.05	.1	.15	.5	1	3	5	10	30	100	200

3A	6	9	11	26	41	48	52	55	46	22	16
6A	2	4	6	18	30	37	42	48	42	-	-
10A	-	1	4	8	14	25	30	36	38	21	11
15A	-	-	-	3	5	13	19	25	29	10	14


Line to line in 50 ohm circuit

Current Rating	Frequency - MHz
Current Rating	.05	.1	.15	.5	1	3	5	10	30	100	200

3A	-	4	7	16	18	37	47	50	43	31	36
6A	-	4	7	19	21	27	40	53	41	-	-
10A	2	4	6	17	22	23	32	48	38	30	26
15A	-	-	2	17	19	29	33	37	37	31	28

† For higher amperage versions, contact us direct

Case Styles

DAF1

Download .STP file *

Typical Dimensions
Terminals (3)	.250	Holes (2)	.07 Dia.
	6.35		1.8
Slot	.07 x .16	Mounting Holes (2)	.132 Dia
	1.8 x 4.1		3.35
		with .260 x 90° countersunk for#4 Flathead Screw

DAFP

Download .STP file *

Typical Dimensions
Pins	.031 x .060 ±.003	Mounting Holes (2)	.132 Dia
	.787 x 1.524 ±.076		3.35
		with .260 x 90° countersunk for#4 Flathead Screw

DAS1

Download .STP file *

Typical Dimensions
Terminals (3)	.250	Holes (2)	.07 Dia.
	6.35		1.8
Slot	.07 x .16
	1.8 x 4.1

* .STP files can be imported as 3D models into most CAD systems.
Files are compressed in .zip format for easy download

PC Board Layout

tolerance ± .005 [0.13]

Board viewed from component side

Recommended Panel Cutouts

DAF

DAS

Panel Thickness	G Dim. ± .002

0.031 - 0.052	1.260
.79 - 1.32	32.00

0.046 - 0.068	1.350
1.117 - 1.73	34.29

Case Dimensions

Part No.	A	B	C	D	E
	(max.)	(max.)	(max.)	±.010	(max.)
	(max.)	(max.)	(max.)	± .25	(max.)
DAF1	2.15	1.12	0.81	1.575	1.98
DAF1	54.61	28.45	20.57	40.01	50.29

DAS1	1.98	1.10	0.81	0.96*	1.41
DAS1	50.29	27.94	20.57	24.38*	35.81

DAFP	1.54	1.12	0.81	1.575	1.98
DAFP	39.12	28.45	20.57	40.01	50.29

* Max. dimension

Part Numbers

Click on any part number for distributor stock status and eCommerce Links. For more information refer to the Corcom Part Numbering System reference.

3DAF1	10DAF1
3DAS1	10DAS1
3DAFP	10DAFP
6DAF1	15DAF1
6DAS1	15DAS1
6DAFP	15DAFP

Mating Connectors

GA310 - Custom connector assembly with 3, 36" long 18 gauge wires to mate with DA Series filter

Molex Component Numbers:
03-12-1036: Connector housing to mate with DA Series
18-12-1222: Female Terminal (3 needed per housing)

USA Customer Service:	1-800-468-2023
Corcom Products Direct:	1-847-680-7400
Germany:	49-89-6089-0

Dimensions are in inches and millimeters unless otherwise specified. Values in italics are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change.