Skip to content
 |  Tyco Electronics Segment Indicator  |   | 
Tyco Electronics - Our commitment. Your advantage.
Visit www.tycoelectronics.com Corcom Products
Home > Series > 3Phase > A

A Series

High Performance 3-Phase RFI Power Line Filters for WYE Applications

UL Recognized
CSA Certified
VDE Approved

Catalog Data Sheet

A Series

The 3-phase filters are designed for 3-phase, four wire, WYE applications providing filtering in each of the three lines plus the neutral and ground line.

The 3-phase models feature:

  • Both common mode and differential mode suppression from 50 kHz to 30 MHz
  • Effective for both balanced and unbalanced three phase loads
  • Ground choke included
  • Shielded construction

The dual stage AYT provides higher performance, while the single stage AYP is good for lower noise environments.

 

Electrical Schematic

AYP6C Models

AYT6C Models

Resistor location for reference only

Specifications

Maximum leakage current, each line to ground:
  @ 120 VAC 60 Hz 1.4 mA
  @ 250 VAC 50 Hz 3.4 mA
     
Hipot rating (one minute):
  line to ground 1500 VAC
  neutral to ground 1500 VAC
  line to neutral 1450 VDC
     
Operating Frequency: 50 / 60 Hz
     
Rated voltage (max.):  
  phase to phase 440 VAC
  phase to neutral / ground 250 VAC
     
Rated Current: 20A to 60A *
  * refer to part number for rating
Minimum insertion loss in dB:
Line to ground in 50 ohm circuit
Current Rating Frequency - MHz
.05 .1 .15 .5 1 5 10 30
AYP6C
20A 22 32 39 55 56 65 65 54
30A 15 24 30 55 55 61 63 50
45A 8 19 25 49 49 56 58 45
60A 5 16 22 50 50 54 54 47
AYT6C
20A 45 63 70 75 75 75 75 65
30A 29 53 61 75 75 75 75 60
45A 15 39 43 75 75 75 75 50
60A 12 37 46 75 75 75 70 45
Line to line in 50 ohm circuit
Current Rating Frequency - MHz
.05 .1 .15 .5 1 5 10 30
AYP6C
20A 20 38 50 65 65 65 60 52
30A 18 28 43 65 65 65 59 48
45A 8 20 27 60 65 65 56 43
60A 20 24 27 60 65 65 56 50
AYT6C
20A 27 56 65 70 70 70 70 70
30A 17 46 55 75 75 75 75 70
45A 14 41 50 75 75 75 75 65
60A 26 50 58 75 75 75 75 60
 

Case Styles

AYP6C & AYT6C

 

End Bell Mounting Accessories

Mounting brackets available in two sizes, 20/30 amp (AA400) and 45/60 amp (AA405).


AA400/405

End Bell mounting kits available in two sizes, 20/30 amp (AA406) and 45/60 amp (AA407)

AA406/407

10 pack of additional captive nuts to mount filter: AA401

 

Case Dimensions

Part No. A* B C D E
(max.) (max.) (max.) ± .030 ± .015
± .76 ± .38
20AYP6C
30AYP6C		 8.82 5.57 2.56 4.616 1.50
224.0 141.5 65.0 117.2 38.1
45AYP6C
60AYP6C		 9.43 6.92 4.82 5.950 3.75
239.5 175.8 122.4 151.1 95.3
20AYT6C
30AYT6C		 13.82 5.57 2.56 4.616 1.50
351.0 141.5 65.0 117.2 38.1
45AYT6C
60AYT6C		 13.83 6.92 4.82 5.950 3.75
351.3 175.8 122.4 151.1 95.3
* For end bell covering terminals and connections, add:
20A & 30A 5.57  
141.48
45A & 60A 6.45
163.83

Part Numbers

Click on any part number for distributor stock status and eCommerce Links. For more information refer to the Corcom Part Numbering System reference.

20AYP6C 20AYT6C
30AYP6C 30AYT6C
45AYP6C 45AYT6C
60AYP6C 60AYT6C

 
USA Customer Service: 1-800-468-2023
Corcom Products Direct: 1-847-680-7400
Germany: 49-89-6089-0
Dimensions are in inches and millimeters unless otherwise specified. Values in italics are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change.